Masimo Multisite Reusable Sensors

Reusable Multisite Sensors for Masimo Pulse Oximeters
SKU: 4771, 0352, 5494
*
$0.00
excluding shipping

Masimo Reusable Multisite Sensors are each designed to be used with a specific cable. Below you will find a listing of multisite sensors with the corresponding cable listed. The Rad 5 Pulse Oximeters sold by Cascade use the LNCS YI Mulitisite Sensor.

LNCS YI Reusable Multisite Sensor

This sensor is designed to connect to the Masimo Rad 5 Red LNC-04 cable.

  • Designed to be used with adhesive and foam wraps
  • New cable connector design improves moisture resistance
  • Covered connector provides additional protection from liquid at all times
  • Designed for accurate monitoring during electro-surgical interference
  • Designed for accurate monitoring during intense ambient light
  • Accurately performs under conditions of motion and low perfusion
  • Reports true alarms while minimizing false alarms
  • Connects to all Masimo SET oximeters via LNC™ patient cable
  • Multiple designs to serve the needs of many patient types

M-LNCS YI Reusable Multisite Sensor

This sensor is designed to connect to the Masimo Rad 5 #2406 M-LNC cable.

  • Designed to be used with adhesive and foam wraps
  • Covered connector provides additional protection from liquid at all times
  • Designed for accurate monitoring during electro-surgical interference
  • Designed for accurate monitoring during intense ambient light
  • Accurately performs under conditions of motion and low perfusion
  • Reports true alarms while minimizing false alarms
  • Connects to all Masimo SET® oximeters via M-LNC™or rainbow patient cables
  • Multiple designs to serve the needs of many patient types

LNOP YI Reusable Multisite Sensor

This sensor is designed to connect to the Masimo Rad 5 #2058 LNOP cable.

 

 

  • A 'Y' shaped mulitsite reusable sensor with a 3-foot cable that can be used on patients > 1kg.
  • The sensor is attached using either an adhesive attachment wrap or a non adhesive foam wrap.
  • LNOP Y-I recommended weight range: Greater than 1 kg.
  • Recommended monitoring site:
    • Greater than 10kg: ring or middle finger of non-dominant hand.
    • Greater than 3 kg and less than 10kg: great toe.
    • Less than 3 kg: across the foot or alternatively across the palm & back of hand.
  • Reusable sensors must be repositioned every 4 hours